Lumberjack Log Splitter is mainly used for the crushing of wood, trunks, branches, straw, bamboo poles, wood blocks, twigs, leaves, bark, bamboo branches, chemical raw materials and other materials. It is especially used in orchards, botanical gardens, landscaping departments, etc. The crushed branches, trunks and leaves are used as fertilizer. The machine can be installed on a cart or agricultural vehicle, using electric motors, diesel engines or gasoline engines as power to move the wood shredder. Lumberjack Log Splitter will also produce failures during use, so how should it be solved? Cnsuperpower explained the common faults and solutions of Lumberjack Log Splitter today.
Failure 1: The bearing temperature is too high
1. The bearing has stolen goods; 2. The bearing is damaged; 3. The butter is insufficient; 4. The V-belt is too tight; 5. The bearing seat assembly is unqualified
Remedy: 1. Clean the bearing; 2. Replace the bearing; 3. Add butter; 4. Adjust the belt tightness; 5. Replace the unqualified parts
Fault 2: Reduced output
Causes: 1. The blade is worn; 2. The spindle speed cannot be reached; 3. The hammer is worn seriously
Remedy: 1. Timely magic blade; 2. Adjust the belt; 3. Replace the hammer
Breakdown 3: Severe collective vibration
Causes: 1. Feeding too fast; 2. Clogged screen holes
Exclusion methods: 1. Slow down the feeding speed; 2. Stop to clean the sieve
Fault 4: Abnormal sound
Causes: 1. There are foreign objects in the crushing room; 2. Loose fasteners in the machine;
Remedy: 1. Shut down to clear sundries; 2. Shut down to check and strengthen
The above is the common faults and solutions of Gasoline Log Splitter summarized by Cnsuperpower. I hope to help everyone. We are a professional manufacturer of Gasoline Log Splitter. Our technical team is very advanced. We are always at the forefront of the wood crushing industry. Hope that our Gasoline Log Splitter can get your approval, you are welcome to come to buy.