September 21, 2020 in Travels
Perfume Atomizer is one of the main packaging materials in cosmetics. The popular perfume atomizer in the market consists of an ellipsoidal container with a piston at the bottom. Its design principle is to use the contraction force of spring and prevent air from entering the bottle, thus creating a vacuum state, while using atmospheric pressure to push the piston at the bottom of the bottle forward. However, because the spring force and atmospheric pressure can not give enough force, the piston can not be attached to the bottle wall too tightly, otherwise the piston will not rise and move forward because of excessive resistance; On the contrary, if the piston is easy to move forward and leakage occurs easily, the perfume atomizer has very high professional requirements for manufacturers.
Appearance quality requirements of perfume atomizer:
1. Appearance: Perfume atomizer should be complete, smooth, free from cracks, burrs, deformation, oil stains and shrinkage, with clear and full threads; The bottle body shall be complete, smooth and bright, with straight and smooth bottle mouth and full thread, without burr, hole, obvious scar, stain and deformation, and no obvious dislocation of the mold clamping line. Transparent bottles should be transparent and clear.
2. Cleanliness: clean inside and outside, no free pollution, no ink stain pollution.
3. Outer packing: The packing carton shall not be dirty or damaged, and the plastic protective bag shall be lined in the carton. The packaging of bottles and lids that are easy to scratch shall be subject to avoiding scratching. Packed in a fixed quantity per box, and shall not be mixed. The factory inspection report shall be attached to each shipment, and the contents such as product name, specification, quantity, production date and manufacturer shall be clearly identified on the outer box.
September 14, 2020 in Travels
For packaging design, highlighting the main image in packaging is a very important content. Packaging design belongs to art, but it is not pure art. It is a classification of practical art. Therefore, it is very important to distinguish the primary and secondary points in the design of Make Up Package. Only when a make up package has distinct layers, can people feel that the make up package is thoughtful and creative, and can give consumers a better visual effect.
Many packaging designers spend a lot of time on the packaging of goods, but they have not achieved very satisfactory results. Why? One of the big factors is that there is no accurate positioning of the image of goods. For cosmetics, its consumers are mainly women, so the design of make up package should be conceived from the perspective of women, study women’s living habits and consumption habits, and pursue correct design ideas. Although there is no direct relationship between the image of make up package design and the technology of making packaging, it has a close rest with the designer’s understanding of products.
First, the packaging design of cosmetics, for example, should focus on the design of pictures, because consumers are willing to believe in the real skin experience, and explanations from pictures can give them more real feelings. Pictures are characterized by intuition and image, on the other hand, pictures can also make goods reappear. For advertising, pictures are a realistic technique, and it is very convincing to apply real photos to packaging design.
Second, using raw materials of products as the main image of commodity packaging is also a good choice for make up package design. For cosmetics, consumers pay more attention to the composition and texture of cosmetics, so raw materials are the aspects that people care about. If the function of this raw material is highlighted in packaging, it will win more consumers’ love.
Third, if it is a big cosmetic brand, we usually find that they will take the logo or trademark of the enterprise as the main image of the make up package, so that consumers can identify it more quickly and find their favorite cosmetic brand. Of course, this method lies in that the brand of the cosmetic enterprise should be big and loud.
Fourth, for people, the biggest feature of cosmetics is its use function, and what benefits it can bring to people is the main factor for people to buy it. Therefore, the main image of make up packagedesign can also be considered according to its use. When many people pay attention to its good use, people choose it without thinking, so it is a good choice to embody the use of products in packaging.
For cosmetics packaging design, there are still many contents that can be used as the main image, all of which should start from consumers and take into account consumers’ use psychology. At the same time, consumers in different fields, different ages and different strata have different requirements and concerns for purchasing cosmetics. Considering all aspects together, we can give an accurate image design for cosmetics packaging.
September 7, 2020 in Uncategorized
Cosmetics packaging like other packaging, has the basic functions of protecting goods, facilitating use, conveying information, beautifying goods and promoting sales. Especially its beautification function is particularly important in cosmetics packaging. So what is the development prospect of Cosmetics packaging factory?
In modern society, the emergence of new packaging materials and technologies provides abundant resources for diversified cosmetics packaging. Glass, plastic and metal are the main cosmetics packaging materials used at present. Glass has become the main material of high-grade cosmetics because of its special bright effect and satisfactory weight. For high-grade cosmetics or cosmetics which are volatile and easy to lose fragrance, such as perfume, they are generally packaged in glass bottles.
Through the analysis of the development prospect of cosmetics packaging, many cosmetic manufacturers have begun to pay attention to environmental protection, and consider whether these materials can be recycled in the selection of cosmetics packaging materials, which is in line with the increasing awareness of environmental protection. In the field of cosmetics packaging, with the improvement of technical level, the development of packaging gradually highlights the characteristics of individualization and innovation, introduction and application of new technologies and new processes, development and substitution of new environmental protection materials, etc. Safe and convenient packaging will be more welcomed by the market.
In addition, as more and more consumers accept online shopping, packaging will play a key role in the e-commerce experience between brands and consumers. Online shopping is becoming more and more popular all over the world, and it can be seen everywhere in all markets around the world. Although the main advantage of online shopping is convenience, consumers expect more from their favorite brands. When the designed packaging needs to be browsed online, or when the freight packaging needs to be opened when it comes home, the experience of e-commerce packaging must reflect the expectation of consumers when shopping in the store.
With the development of packaging and printing technology, digital printing, plateless printing, plateless die-cutting technology began to be widely used in packaging and printing industry, and with the development and application of Internet technology, packaging and printing and processing costs gradually decreased, making personalized packaging design gradually become a reality. Personality impression is a very important psychological factor for cosmetics with strong times.
August 24, 2020 in Travels
With the development of Aluminum Lipstick Tube market, the difference between lipstick tubes produced by lipstick tube manufacturers is getting smaller and smaller. Therefore, efforts should be made in packaging aluminum lipstick tubes to highlight the product theme and attract consumers. The homogenization of aluminum lipstick tube products is becoming more and more obvious, and the analysis of lipstick tube packaging industry is becoming more and more necessary.
Aluminum lipstick tube is a sharp tool for cosmetics enterprises to promote their products. The beautiful design of lipstick tube packaging will attract consumers to a greater extent, which will help improve the sales performance of enterprises. Besides making a fuss about the appearance of lipstick tube packaging, now more and more enterprises pay more attention to highlighting the product theme and taking the road of low carbon and environmental protection.
In appearance design, lipstick tube packaging should be based on different consumer groups, and be suitable for different groups’ aesthetic concepts and psychological feelings. Women’s lipstick tubes should be characterized by warmth, romance and femininity. Men’s lipstick tubes are masculine, individual and easy to use. For the elderly, lipstick tubes should be embodied in humanized design and convenient use. Children’s lipstick tube should reflect more cartoon elements and children’s psychological needs.
Under the background that environmental protection has become an industry, more and more enterprises choose low-carbon and environmentally friendly packaging methods and materials by increasing research and development technology. Well-known enterprises in the industry have put out the slogan of packaging environmental protection, using new technologies and materials, introducing clean production mechanism, and adopting (economic mode) production mode and product structure based on green, environmental protection, low energy consumption, low pollution and low emission, thus reducing carbon emissions and realizing sustainable economic development. From the beginning of packaging design, enterprises should meet the requirements of simplicity, practicality and environmental protection.
Through the analysis of lipstick tube packaging industry, we can draw the conclusion that aluminum lipstick tube not only exists as a packaging form, but also has the function of inducing consumers to consume. This requires lipstick tube packaging to stand out on many competitive shelves. The market and environment are changing, and lipstick tube packaging enterprises should keep pace with the times and constantly adapt to market demand.
August 17, 2020 in Travels
Glass, plastic and metal are the main Mascara Container materials currently used, among which plastic is the most used. Many consumers bottle empty bags and discard them at will after using them, resulting in environmental pollution; Or empty bags are bottled, cleaned and collected, but not fully recycled, resulting in waste of resources. With the increasing attention to environmental protection and global warming, sustainability. The concept of renewable and green packaging has been deeply rooted in people’s hearts. Manufacturers gradually adopt renewable or recyclable raw materials in mascara container, and at the same time, make plans to minimize energy consumption, water pollution and air pollution, and increase later recycling to replace (use one substance instead of another (mostly the strong replace the weak)), or turn to produce environmentally friendly waste.
With the discovery and application of more and more packaging materials, there are more kinds of packaging materials in China. Due to the rapid development of material industry, many new packaging materials have emerged, such as microwave oven special packaging, cooking packaging, (polyester) bottles and other new composite materials, as well as packaging materials with high performance such as high pressure resistance, barrier property, heat sealing property and gas barrier property. And with the concept of low-carbon environmental protection becoming the main theme of society, low-carbon environmental protection is practiced in many fields, as is the packaging material field. Many packaging materials that pollute the environment are fading out of our life, and green packaging materials have become the development trend and future of the packaging industry. Nowadays, there are many kinds of green packaging materials, which can be roughly divided into four types: reusable and recycled packaging materials, edible packaging materials, degradable materials and paper materials.
Among them, degradable green packaging materials refer to degradable plastic packaging materials, which are mainly used for packaging cosmetics. This kind of plastic can be degraded and reduced by itself in nature after completing its mission, and has no pollution to the environment. Therefore, mascara container tend to be degradable packaging materials, and a large number of mascara container are discarded and cannot be recycled, resulting in waste of resources and environmental pollution. With people’s attention to environmental protection and sustainable development, degradable new environmental protection packaging materials will be more used in mascara container.
August 3, 2020 in Travels
Every commodity has its own brand, and we all hope that our brand will have high popularity. After a period of accumulation and careful planning and design, the Aluminum Lipstick Tube will soon become a well-known brand. Once it becomes a famous brand, it will bring great benefits and good reputation to the enterprise. Therefore, a product should attach importance to the brand positioning of aluminum lipstick tube at the beginning of its listing. Brand positioning generally takes into account three factors:
1. Highlight the image color of aluminum lipstick tube: Clear color can give people a strong visual impact. Therefore, firstly, we should select several distinctive fixed colors that conform to our product concept as TINT, and become the image color of products, and use the image color fixedly at any time, so as to achieve the purpose of making our products clear and easy for consumers to remember.
2. Highlight the font image of aluminum lipstick tube: Generally, products should have brand standard font image design to clearly highlight brand personality. This standard font design, together with image color, is one of the main expression techniques of brand design. Now, with the development of market economy, if you want to occupy a certain market share in the fierce market competition, so that consumers can recognize many brands at a glance and are willing to buy products, you must highlight your brand image.
3. Highlight the graphics of aluminum lipstick tube: packaging design will generally design the brand graphics of products, which is also consistent with the product concept. The graphic image can be concrete graphics or abstract graphics, and its connotation must be consistent with the brand. Graphics should also have appropriate colors, and be in harmony with image colors, so as to play a vivid and vivid role in propaganda.
The Aluminum Mascara Container is also one of our product, welcome to buy and purchase!
July 27, 2020 in Travels
Choosing a cosmetics is actually the same as falling in love with a dress and a handbag. At the first sight of it, the heartache comes from deep inside. In addition to the intrinsic quality of the product, the external cosmetics packaging containers have to be the focus of attention. It is very important to choose a quality Cosmetics packaging factory.
Cosmetics packaging bottles are fashionable objects for modern women, and more and more new products have been released to pay attention to this point. They show different tastes with touching details, smooth lines and distinguished signs.
For cosmetics, what kind of effect the product itself will have on the skin, how it smells and how long it will take to take effect, these seem to be a big criterion for us to consider whether the product is good or bad. In addition, cosmetics packaging containers are also a very important factor, especially at present, beautiful and delicate cosmetics packaging bottle design is one of the most indispensable strategies in brand marketing. The way and appearance of each product is like reading a hidden story, which always surprises people. I’m afraid it is also the original intention of designers who create various cosmetics bottles to make users feel this way. When cosmetics and fragrances are placed in such cosmetics bottles, their beauty will be even more dazzling, and every outstanding cosmetics bottle design is elaborately carved by designers, which is worthy of our careful collection.
Eyeliner Tube is also one of our product, welcome to buy and purchase!
July 13, 2020 in Travels
The words on the Lipstick Tube package are the basis for consumers to choose lipstick. The words on the lipstick tube package mainly include brand name, product name, descriptive introductory words, etc. When designing brand words, designers can consider the form and combination of brand words, so that the words created can be full of personality and arouse people’s aesthetic pleasure.
Product names should be catchy, simple in design and clear to consumers at a glance. Explanatory words play an important role in conveying the information about the use of lipstick tube. Explanatory words with clever combination and good font can make people happy, leave a good impression and get a good psychological response.
The size, font and arrangement of the characters on the lipstick tube package, as well as the echo of graphics and colors, are important factors to achieve the harmony of the overall visual effect and theme content of the characters. Therefore, the characters should not only be well matched in font and overall, but also be processed in color and some strokes, and should highlight the personalized design of the characters, so as to achieve perfect results.
Lip gloss Tube is also our hot product, you can click to view.
July 6, 2020 in Travels
One of the ways to keep your beauty is to use eyeliner, which has been used all over the world. At the same time, there are many kinds of Eyeliner Tube. In order to make you highlight your own characteristics, we need to pay attention to some small details when choosing, so as to be more attractive.
Selection of eyeliner:
1. Cosmetic Pencil Tube Company introduced that there are many different types of eyeliner, in the form of pencils, each with different consistency and texture. Pink pencils, sometimes with strong colors. They are a good choice if you want your eyeliner to turn into “smoky makeup”.
2. Consider the formula of eyeliner. Most companies offer different requirements, including sensitive eyes and organic formulas with different eyeliner, and friendly products.
3. Pencil eyeliner has a wide range of colors, including blue and emerald, black and brown. A good experience is to use colors such as black, dark brown, deep purple or gray. If you want to look more natural, you can strengthen or soften these colors.
Aluminum Lipstick Case is also our hot product, you can click to view.
June 29, 2020 in Travels
There are various materials for Lipstick Tube. The following are some materials for lipstick tube. You can know about them.
AS: Hardness is not high, it is brittle (there is crisp sound when knocking), transparent color, and blue background color can be directly contacted with cosmetics and food. In ordinary emulsion bottles and vacuum bottles, the bottle body is usually made of material, and small-capacity cream bottles can also be made. Appears transparent.
ABS: It belongs to engineering plastics, is not environmentally friendly, has high hardness, and cannot be directly contacted with cosmetics and food. In acrylic cosmetic packaging materials, it is generally the material of inner cover and shoulder sleeve. The color is yellow or milky white.
PP and PE: belong to environmental protection materials, can be directly contacted with cosmetics and food, and are the main materials for filling organic skin care products. The materials are white and translucent. According to different molecular structures, three different degrees of hardness and softness can be achieved.
PET is an environment-friendly material that can be directly contacted with cosmetics and food. It is the main material for filling organic skin care products. PET is soft and transparent.
PCTA and PETG: belong to environmental protection materials and can be directly contacted with cosmetics and food. They are the main materials for filling organic skin care products. The materials are soft and transparent. PCTA and PETG are soft and easy to scratch. Besides, it is not commonly used to spray and print.
Acrylic: The material is hard, transparent, and the background color is white. In addition, acrylic is often sprayed in the outer bottle or colored during injection molding in order to maintain transparent texture.
Lip gloss Tube is also our hot product, you can click to view.