pthhouse

Light steel villa, also known as light steel structure house, its main material is light steel keel synthesized from hot-dip galvanized aluminum steel strip through cold rolling technology.

The aluminum-zinc alloy structure of the galvanized steel sheet is composed of 55% aluminum, 43.4% zinc and 1.6% silicon solidified at a high temperature of 600°C. The entire structure is composed of aluminum-iron-silicon-zinc, forming a dense quaternary crystal. So as to form a strong and effective barrier to prevent the penetration of corrosive factors.

Light steel characteristics:

1. Corrosion resistance:

The corrosion resistance of “55% aluminum-zinc-plated steel coil” comes from the barrier protection function of aluminum and the sacrificial protection function of zinc. When zinc is used for sacrificial protection on the cut edges, scratches, and scratches of the coating, aluminum forms an insoluble oxide layer and exerts a barrier protection function. The aluminum-zinc alloy steel coil has been subjected to outdoor exposure tests for more than 20 years in various atmospheric environments, and it has been confirmed that the cutting edge protection function of 55% aluminum-zinc steel plate is better than that of galvanized steel plate and 5% aluminum-zinc steel plate. good.

2. Heat resistance:

The heat resistance of 55% aluminum-zinc alloy steel plate is better than that of galvanized steel plate, which is similar to the high temperature oxidation resistance of aluminum-plated steel plate. The aluminum-zinc alloy steel plate can be used in a high temperature environment up to 315 degrees.

3. Reflectivity:

The 55% aluminum-zinc alloy steel plate has a high reflectivity, making it a heat-resistant barrier; the thermal reflectivity of the aluminum-zinc steel plate is almost twice that of the galvanized steel plate, so it acts as a roof and inlay without painting. The board can also achieve energy-saving effects.

4. Paintability:

Due to the excellent adhesion between the zinc layer of the galvanized steel sheet and the paint, it can be painted without pretreatment and weathering when used as a sign board for general purposes; while the galvanized steel sheet needs weathering and pretreatment.

If you want to know more, please contact us: light gauge steel.

Many people have asked me about the construction requirements of the flat pack container house on the construction site. Next, let us answer it for you. I hope it will help you!

1. The connecting bolts between the components of the flat pack container house must be tightened.

2. Gray line stakeout: Measure according to the location of the living area plan.

3. The bolts must be installed in the correct position and with gaskets according to the design requirements, and must not be installed or missing.

4. The installation position of each component of the flat pack container house on the site should meet the design requirements, and the location of the on-site welding parts should be accurate, without false welding or missing welding.

5. The floor slab of the flat pack container house should be ash-laid. If there are cracks between the slabs, installation and use are not allowed. The surface of cement or fine stone concrete should be compacted and polished. Cracks, peeling and sanding are not allowed.

6. ​​The flat pack container house shall mark the position of doors and windows according to the design drawings, cut out the position of the door and window holes with a cutting machine, and install the windows and doors according to the position of the door and window holes.

7. Install the doors and windows of the flat pack container house correctly and tighten them with bolts. The doors and windows should be installed flexibly without blocking. The glass should not have pitted surfaces or cracks. The glass should be clean and the accessories should be installed firmly.

8. After on-site welding and transportation, the peeling part of the flat pack container house primer should be painted with one layer of anti-corrosion paint, and the exposed parts of the components should be painted with two layers of top paint. The paint shall not have the phenomenon of missing brushing, peeling, hanging paint and returning rust.

9. The container office and walls must be corrected according to the layout plan. The corners and external corners of the umbrella wall are sealed with angled aluminum. The connection between the board and the board is made of I-shaped aluminum. The walls must be vertical and the caulking depths are consistent, Tidy and clean, the wall should be clean, the color should be the same, the board seam should be neat, the nailing surface should be the same up and down, and there should be no displacement, and the necessary parts should use self-tapping bolts.

The above are the construction requirements for the flat pack container house on the construction site. I hope you can read it carefully and apply what you have learned. For more product information, please click here: container camp.

What are the advantages of steel structure houses?

1. Replace traditional red brick and concrete. The steel structure residence breaks through the traditional construction mode of “Qin brick and Han tile” style in China, and is known as the “fourth housing revolution. It has a high degree of industrialization, which facilitates the formation of a standard building system, and realizes the factoryization of components and the mechanization of construction. produce.

2. The energy-saving effect is good, not only higher than wood-structured houses, but also more than 60% energy-saving than brick-concrete houses. When the construction service expires and is demolished, all steel structure materials can be recycled.

3. The steel structure has high strength, good wind resistance and earthquake resistance. Especially in the earthquake zone, steel structure houses have overwhelming advantages compared with brick-concrete houses.

4. The shape is freely designed, the large indoor space has no beams or columns, and the span can reach 12 meters. This is also the biggest advantage of steel structure houses. The spacious space of the steel structure just gives the owner a way to arrange his own living space according to his own hobbies, and no longer need to influence the individual design of the house because of the load-bearing walls and structural columns.

5. The treatment of the foundation and foundation is very simple, and because the main body and foundation are equipped with a moisture-proof layer, the moisture-proof effect will be more prominent.

6. Fast construction speed, short period, all-weather construction, not affected by the season, short construction period, light weight of the steel structure, and dry construction without pollution and noise. It is a model of environmentally friendly buildings.

7. Because of the above-mentioned characteristics of steel structure, it is very popular among people, and the effective indoor area is enlarged, which is 6% higher than the corresponding brick-concrete and reinforced concrete structure. Increase the effective living space; the effect of heat preservation, heat insulation and sound insulation is outstanding.

For more steel structure applications, you can click on the link below to learn: steel structure warehouses.

With the development of the logistics industry, steel structure warehouses are constantly updated. Many traditional warehouse functions are increasingly unable to meet the rapid development of the logistics industry. New automated steel structure warehouses are replacing traditional warehouses, and steel structures have become the main structure of logistics warehousing.

The new steel structure logistics warehouse is an important part of the logistics industry. This kind of warehouse is a kind of warehouse with a high level of technology at present. Shelves, lane stackers, warehouse direct working platforms, automatic access and operation control systems are the main parts of the warehouse combination. The shelf is made of steel structure. The outstanding advantage is to realize the reasonable operation of the warehouse structure, maintain automation and simplify the operation. It uses computer or bar code technology in management.

The new steel structure multi-layer logistics warehouse greatly saves valuable land resources, which is 2-5 times the utilization rate of civil construction warehouses. The steel structure warehouse facilitates the formation of an advanced logistics system and strengthens the level of enterprise production management. Traditional warehouses are merely goods warehouses, and storing goods is only a function. However, the current new type of steel structure warehouse is one of the important production lines for the company’s external procurement and its production into automated storage, and it is an automated system.

Dynamic warehouses are contrary to traditional static warehouses. Steel structure warehouses must not only make goods meet the warehouse’s automatic storage requirements, but also conform to the production connection of external warehouses. Then, the steel structure warehouse uses the computer management system and automated material transportation equipment to make the warehouse an important part of the enterprise’s production logistics. The advantage of this kind of warehouse is that it can reduce inventory and improve work efficiency. At the same time, it becomes safe and reliable, effectively reducing loss of goods, and ensuring the safety of workers. Then, the new steel structure warehouse can also form an advanced production connection to promote production promotion.

Fast, new, automated, recycling, and economical and energy-saving are the trends of modern development. The new steel structure warehouse has these advantages, is suitable for this society, and can provide more convenience and higher efficiency. Look for the new type of steel structure warehouse, will enable the enterprise to get more outstanding development.

PTH has over 20 years of experience in this industry, and can provide full services to customers’ requirements covering design, manufacturing, logistic, installation, and after sales service.

For more global cases of steel structure buildings, please visit the official website of PTH.

In the past few years, container houses have become more and more popular due to their affordability, durability and eco-friendliness. In theory, it seems easy to build an ideal container house, but there are a few things you need to consider to ensure that the house is well-built, beautiful and sustainable. We have prepared a checklist to show you some simple suggestions you can take to ensure that you can easily buy a proper container house.

1. Check the container house before buying

When buying a container house, you may not be able to inspect it in person, especially on the other side of the world. However, you can request a picture before the product is shipped and a packed picture of the container house. Pay attention to the dimensions before purchasing to ensure that there is enough space for the container house you buy.

2. Study building codes in your area

Different countries or cities have different regulations for building container houses. Before you start building, make sure you understand the legal information. To make sure you get off to a good start, check the building codes of your local place and state.

3. Find the right building contractor

Finding a contractor experienced in all aspects of the container house can make the construction process smooth. They can help you get the type of container house you need. It is better to deal with one contractor than several ones, as this makes project management easier. PTH can provide one-stop service, including R & D design, manufacturing, storage and transportation, installation guidance, after-sales service and other solutions.

4. Ensure good thermal insulation performance

You need to choose a container house with a thermal insulation effect to make your living more comfortable. PTH’s container house uses 75mm EPS sandwich panels with an EPS density of 12kg/㎡. It has lightweight, heat insulation, sound insulation, and corrosion resistance.

5. Avoid dividing containers

When an ordinary container is cut into additional doors or windows, its structural integrity will be affected. The more you cut the container, the more you need to strengthen it, increasing your budget. The doors and windows, switches, and sockets of the PTH container house are prefabricated in the factory. The wall mounting position can be moved for free combination.

6. Design project planning

Make sure you have a good understanding of where the electrical wires and plumbing pipes will enter and exit the house. If you have never bought a container before, determine a detailed project plan first. PTH has an independent R & D technology center with more than 100 R & D design and technical engineers, including 9 nationally registered construction and structural engineers and 3 senior engineers. They have formed an experienced and skilled professional team that has laid a solid foundation for PTH’s design and technology.

Find a professional container house manufacturer to buy it, the service is in place, and the after-sales service is guaranteed. PTH is a very good choice.

A modular house is a house built in an indoor environment in a factory, and then the whole house is transported to a new location in a permanent house assembled by the contractor and the prefabricated house foundation. But it should be noted that modular houses are not mobile houses. It is just a house that is not built directly on your land. Modular houses are also commonly referred to as factory-built, system-built, or prefabricated houses.

What is the difference between a modular house and a house built on-site?

Since the modular house is built in the factory, more than 80% of the work will be completed indoors, so the construction part of the house can be completed in a few weeks instead of months, and the construction will not be affected by the weather. But modular houses must comply with specific rules, guidelines, and building regulations that usually exceed traditional on-site houses, so there will be stricter review measures.

Advantages of modular houses:

The evaluation of the modular house is the same as the house built on-site, and there is a permanent infrastructure under the house.

General modular house manufacturers provide design services, which can provide certain changes in accordance with customer requirements in a reasonable and flexible manner.

The design style and size of the home can be chosen, not set in stone.

The modular structure can be used for commercial applications, including office buildings.

Modular houses are permanent structures, that is, “real estate”.

Modular houses are also required to review green and environmentally friendly buildings and can be more energy-efficient.

Modular houses are much faster than on-site construction, but the review of modular houses is more stringent.

The mortgage for a modular house is the same as for a house built on-site.

The insurance premium for a modular house is the same as the insurance premium for a house built on-site.

The taxes and fees for modular houses are the same as those for houses built on-site.

If you are interested in container construction projects, please feel free to contact us.

Prefabricated houses are becoming more and more well-known, so how do we choose a manufacturer of prefabricated integrated houses that suits us? Here are a few points, and those who are interested can continue to look down:

1. Using light and thin-walled profiles, lightweight, high strength, and small footprint.

2. Parts and accessories are automated, continuous, and high-precision production. Product specifications are serialized, finalized, and matched. The size of each part is very accurate.

3. Structural design, detailed drawing design, computer simulation installation, factory manufacturing and on-site installation are carried out simultaneously. The time difference is small, and the interior decoration is easy to be in place at one time. After galvanizing and coating, the profile has a beautiful appearance and corrosion resistance, which is beneficial to reduce the cost of closure and maintenance.

4. It is convenient to expand the column spacing and provide larger separation space. It can reduce the height of the floor and increase the building area. It has obvious advantages in adding floors, reforming and strengthening.

5. This new type of wall material is widely used, uses a large number of lighting belts, and has good ventilation conditions.

6. The indoor pipes and heating electrical pipes are all hidden in the walls and floor, with flexible layout and convenient modification.

7. To reduce environmental pollution caused by waste, steel structure materials can be recycled, and most other supporting materials can also be recycled, which is in line with current environmental protection awareness. All materials are green building materials that meet the requirements of the ecological environment and are beneficial to health.

8. The light steel wall adopts an energy-saving system with breathing function and can adjust indoor air humidity. The roof has a ventilation function, which can form a flowing air chamber inside the roof to ensure the ventilation and heat dissipation requirements inside the roof.

As a famous China prefabricated house manufacturers and modular house factory, Zhejiang Putian Integrated Housing Co., Ltd. (also known as “PTH”) has been dedicating itself to the one-stop solution of low-rise prefabricated houses. The service ranges from architectural design, production, storage and transportation to installation instructions and after-sales service, etc.

If you want to know more, please contact us: modular house factory.

Multi-Span Steel Structure Building-Nicaragua Coffee Factory

Project time: 2017

Project location: Nicaragua

Project scale: 4600㎡

Product type: Steel structure

Project use: food production plant

The project features: multi-span steel structure, high requirements for waterproof

When customers of this project contacted us, they hoped that PTH could provide a design plan for a coffee factory. As a food production plant, the coffee factory should be different from the traditional industrial production workshop in appearance. Therefore, the project is simple, elegant and modern. The overall shape is a “U” shape, a multi-span structure.

As a coffee factory, customers pay special attention to the waterproofness of buildings and have higher requirements on the waterproofing of the joints. Therefore, we have made special treatments on the edges of the buildings to make the waterproof performance meet the requirements of customers.

There are many types of equipment in the internal coffee manufacturing plant, and it is necessary to coordinate the relationship between the equipment and the pillars and walls. In order to ensure the convenience of internal transportation, we have carried out special treatments on the structure. Make adjustments accordingly.

PTH’s design drawings are designed according to customer needs and local building codes. After obtaining the local government’s permission, they can finally continue to deepen the design after passing the local government’s review. PTH deepening division adopts Tekla and FRAMECAD Structure deepening design software.

PTH has hundreds of fully automated mechanized production lines, which can be combined with efficient production arrangements to provide a strong guarantee for the timely delivery of customer orders. During the product manufacturing process, PTH can provide customers with production progress reports in the form of pictures and videos.

PTH has a professional quality inspection team. Every product process will undergo a strict quality inspection, and products that do not meet the quality standards will never be shipped.

PTH formulates a product process inspection mechanism. IPQC avoids the production of mass quality accidents based on the product quality and technical requirements of the order and conducts irregular inspections every working day. The PTH production department has also set up a production process quality inspection mechanism, and any product can be entered before the next process is confirmed.

PTH designs reasonable packaging solutions based on product structure characteristics/customer quality requirements.

PTH will provide complete and detailed installation drawings for the products. We have professional photographers and post personnel who can provide installation videos for the products and intuitively display the installation steps and installation details of the products.

For details, please contact: steel structure warehouses.

Container houses are gradually replacing the market of panel integrated houses for new modular houses. The container house has unique shape, long service life, earthquake resistance, flood prevention and wind resistance, and can be designed according to customer requirements. More and more container houses are used in high-end areas such as: shops, hotels, sales centers, etc., and container hotel camps distributed by multiple different types of containers can reflect the diversification and functionalization of container houses. The following describes the construction of container camps by multiple container houses.

The container house is regarded as a fashion element, giving a rock style mixed with industrial metal among the green mountains and green waters. The container house in Inner Mongolia adds the wildness of the outdoor scene, restores the nature, and stands in the scenery, just like the movie. The superhero Iron Man silently guards the beautiful homeland in people’s hearts.

Containers have always been widely used in the transportation industry. Since many years, the world has begun to pay attention to the transformation, research and development and application of container buildings. With a large population in our country, the city is facing a continuous decrease in the available land, and the pace of life and work continues to accelerate, prompting the transformation of traditional building methods and beginning to vigorously develop modular buildings. In this context, container construction, as a modular building with a prefabrication degree, has gradually developed in China. Nowadays, with its unique advantages, container houses are widely used in a new type of tourism industry-RV campgrounds.

In terms of construction technology, the ability of container buildings to resist high temperatures and low temperatures is also very significant. In the choice of thermal insulation materials, there is even more flexible and newer technical materials than traditional buildings. A representative example of the low-temperature resistance of Inner Mongolia mobile homes is that they can still work under the extreme temperatures at the Great Wall Station in Antarctica. At present, the commonly used container thermal insulation materials include polyurethane foam material, glass wool or rock wool, ceramic thermal insulation coating, cardboard, straw board, and external bamboo board.

The container house is not only an independent residential unit in the camp, it can also be combined infinitely, and can be turned into a reception center, restaurant, bar, public laundry room, public bathroom and other elements, effectively solving the problem of not having fixed buildings in the camp. “Iron Man” brings unlimited possibilities for camping life.

At present, when investing in camps in China, the problem is that the land construction indicators have not been resolved. The container house can take advantage of the particularity of container construction as a form of accommodation. The mobility element of Hohhot container defines that there is no requirement for land, and any piece of land can be placed. However, wooden house structures, modular houses, etc. have strict requirements on the nature of the land, because they all belong to the building category. First of all, regardless of whether the land is legal or not, the building category must have construction land indicators and declare temporary buildings at the same time. In this respect, the container is similar to the RV.

As a professional container house manufacturer, PTH mainly provides customers with wholesale customized services for container projects.