June 9, 2021 in Uncategorized
Despite their ground-ready, durable and insulated construction, Electric Drinking Water Pump wholesales still present severe hazards for homeowners and should never be used in ponds meant for swimming or human immersion. The problem is simple: electricity and water do not mix. As such, installing an electric submersible water pump for water gardens, natural ponds, or pools requires great skill and experience to avoid electrocution.
Manufacturers design submersible pumps to be safe. For instance, they encase them in cast-iron housing designed to isolate the electrical and working parts of the unit. All cables are shielded and sealed by standard rubber. However, both the casing and the rubber shielding does not guarantee that the submersible water pump will never have any contact with water.
1. Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal due to a crimping method that tightens components within the pump. The seal insulates the inside of the pump from water, humidity, and outside air.
While this produces a high level of insulation, occasional seal failures can occur. A tiny malfunction can bring the inside of the pump into contact with the water garden or natural pond water. The result of this malfunction would be electrified water inside the pond.
2. The Cables
Like the main components of the pump, manufacturers go to great lengths to properly seal the cables. For instance, they will fill gaps with epoxy to prevent water from invading the unit. They also wrap the cables in a neoprene, which is both air and watertight.
Epoxy is incredibly effective at forming a waterproof seal. This seal will not fail unless it is subjected to some form of impact that would cause it to crack. If the seal cracks, water might get into the cable. The same is true for neoprene.
3. Regular Outlets vs. GFCI Receptacles
Both the National Electric Code (NEC) and OSHA require that all homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the power source when an unusual increase or “leakage” in power, like that caused when water comes into contact with electricity, is detected.
Unfortunately, many older homes do not have GFCI receptacles. As a result, plugging an electric water pump into a regular outlet can make it vulnerable to a power surge. It can also increase the risk of electric shock. Therefore, if you use an electric pump, you must make sure that you plug it into a GFCI receptacle or replace your old outlet.
4. Freezing Temperatures During the Winter
During the winter, it is a good idea to remove the water pump from your water garden or natural pond. Winters in Illinois produce frigid temperatures that can plummet below zero. As a result, the water in a natural pond or water garden may stay frozen throughout the season.
Frozen water can take its toll on a submersible water pump. Just one freeze can cause the casing or the cabling to crack open, exposing the electrical parts. You may not notice the cracks due to the multilayers of the casing. Therefore, when you turn on the pump in the springtime, you may be vulnerable to electric shock.
5. Abrasives and Heavy Objects
Since most natural ponds or water gardens contain rocks, plants, sand, and other objects, it is important to ensure that they do not come into contact with the water pump.
When placing your pump, be sure to isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you use sand, position the pump so that it is filtering the least amount of sand possible. Since sand is abrasive, it can damage the inner parts of the pump over time.
6. Never swim or wade in a pond with a Submersible Water Pump
You should never swim or wade in a pond or pool with a submersible water pump. Even though these pumps are designed with many safety features, it is not worth the risk. There are special pumps designed for swimming pools and ponds that do not carry this risk. If you need to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is critical that you turn off the electricity to the submersible pump and enter with caution.
We offer all kinds of pump, such as Lotion Pump Clip Lock, please consult us if you have any questions.
June 2, 2021 in Uncategorized
Spray bottles are simply terrific because they serve more than just a container. They are also a wonderful tool for dispensing liquid products. You can use them in applying chemical or organic cleaners, perfumes, colognes, air fresheners, hairspray, pepper spray, and even salad dressings.
However, Plastic Trigger Sprayer also possess a rather complex structure. This is mainly due to their dispenser or nozzle. Because of this component, spray bottles may be a more challenging kind of bottle to clean and reuse
Unlike with other jars and bottles that have simpler caps, typical dishwashing methods may not be enough to clean spray bottles. Moreover, the contents they usually hold are mostly very strong chemicals and substances. Not being able to clean the container thoroughly may leave certain amounts of these chemicals in the container. Consequently, these could contaminate the new contents you will fill the bottles with.
Cleaning spray bottles may not be as easy as cleaning most other types of containers. Still, there are certainly achievable ways on how to do it yourself. The functionality of spray bottles is too good to let this small issue stop us from reusing them. Don’t worry. We will help you.
Understanding How Spray Bottles Work: Parts and Mechanism
Before moving to the cleaning part, let us first take a closer look into our chosen subject matter.
Spray bottles may be one of the best examples of how we can apply principles found in nature into simple technology. The ingenious idea behind spray bottles is actually the same principle that enables our hearts to pump blood throughout the body. It is what we call a reciprocating pump mechanism.
In a reciprocating pump, two alternating actions are involved. The first action is used to collect liquid into a small chamber through one opening. The second action is to release the liquid through a second opening. This is how the heart collects oxygenated blood from the lungs into its chambers and then pumps it out to the rest of the body.
In a spray bottle, the two actions are done whenever you press the button (or actuator) and second, when the button rises once you release it. Releasing the actuator will allow the pump to suck liquid from inside the container to a small cylindrical chamber. The chamber is located in the neck area of the bottle. Pressing the actuator will then release the liquid from the chamber into the nozzle and out of the bottle.
The reciprocating pump is a relatively simple concept but serves excellently as a dispensing mechanism for spray bottles. It can also be found in many other applications, such as medical equipment, and aeronautics. It is also a fundamental principle used in extracting water and oil from underneath the earth.
The Fine Mist Spray Bottle
A very popular type of spray bottle is the Fine Mist Spray Bottle. It is a great spray bottle because of how it can spray liquid in such small droplets — so small that it practically turns its contents into mist. Smaller droplets mean a more even distribution. That is why it works great as a liquid dispenser.
Fine mist spray bottles still work with a reciprocating pump. However, this type of spray bottle uses a special part called an Insert. The Insert is simply a mouthpiece wherein the liquid passes through a set of channels before exiting the bottle. This set of multiple channels is what creates the mist pattern whenever the contents are dispensed.
The structure of the fine mist spray bottle is also ideal for minimizing the bulkiness of the container. They are known for having a sleek, elegant form. Fine mist spray bottles are definitely the cool crowd of the spray bottle world. They are ideal for colognes, perfumes, essential oil blends, yoga mat cleaners, air fresheners, and more. Terrific, don’t you think?
We offer all kinds of packaging, such as Refillable Perfume Pen, please consult us if you have any questions.
May 19, 2021 in Uncategorized
If you have a private well, the good news is that you have the benefits of low-cost, fresh and clean water for your family. Unfortunately, you’re also responsible for any problems that may arise with your Electric Drinking Water Pump or water system. There may come a day when you turn on the spigot, and there’s no water, or it just sputters. While there are many potential causes for a no-water emergency, the first place to troubleshoot is your well pump.
About Your Water Well Pump
If you live in New England, chances are your well is equipped with a submersible well pump, which is placed underwater within the well. When you turn on the faucet, water is drawn down from your pressure tank, and an electrical signal is sent to turn on the well pump to replenish your tank.
There are several problems you might encounter that may indicate a pump problem, such as decreased water pressure, dirty water at the faucet, odd noises, or air coming from the faucet. Unusually high electric bills may be a signal that the pump is running continuously to maintain water pressure. Anything that puts a strain on the well pump can cause a premature failure.
OTHER WELL PUMP PROBLEMS
While these are common problems, there are other problems to be aware of that may be a bit less obvious and may require investigation to diagnose.
When troubleshooting, consider:
- Power Outage – Sometimes, a problem can be as simple as a blown breaker. Always check the power first. If the breaker is blown, fixing it may be as simple as switching it back on. If the power is on, and you still have no water, shut the power off to prevent further damage and call your well water contractor.
- Drought or Dry Spell – If you’ve noticed spitting and sputtering you may be suffering from lack of water due to drought. Other signs of a lower water table include murky, muddy or a “funny tasting” water coming from your faucet. Long periods of dry weather can lower the water table, or it could mean your pump is at the wrong depth.
- Is The Pump Correctly Sized? – Pump size is determined by the size of your system, the number of fixtures and appliances that use water in your home and your families peak demand. If you’ve recently added a bathroom or new appliances that use water, you may need to increase the pump size to return to a normal flow.
- Check Your Pressure Tank – Along with your well pump; your system also uses a pressurized tank to store that distribute water throughout your home. If the pressure tank is not working, then the well pump isn’t either. They work hand in hand. First, check the pressure switch. This is a built-in failsafe that can shut off in the event of a catastrophic failure like a burst pipe. The switch is found at the top of the feed line from the pump to the tank. It is quickly reset, and this can often solve the problem.
AVOIDING WELL PUMP PROBLEMS
Your pump is designed to last 25 years with proper care. The best way to avoid problems is to schedule an annual maintenance inspection with your well water contractor. An annual inspection is an inexpensive insurance against a failure when you least want it. We will inspect all the lines, the pump, the pressure tank and motor. A little maintenance will ensure your family years of plentiful, safe, clean drinking water! It’s a smart investment.
We offer all kinds of pump, such as Plastic Lotion Pump, please consult us if you have any questions.
May 12, 2021 in Uncategorized
Why should I pay more when less will work just fine!? We’ve all been on this side of the argument and hate to pay more if we don’t have to. For a very simplistic answer to this question, the cheap one is not going to last long, and in the end, you’ll spend more.
So how do I choose the right Foaming Trigger Sprayer manufacturers(or rather, how do I save some money!)? In reality, the basics are pretty simple; however, if you really want to maximize performance and cost, it takes a bit of planning.
To aid in your planning, we’ve put together a list of triggers we sell along with a brief description of each to help you choose the best trigger for your work. We begin with standard triggers with a variety of uses and build into specialized triggers designed for those who really need results.
This trigger is one of our cheapest triggers and a go to for customers who don’t yet understand the importance of their trigger. With trigger settings ranging from mist to spray, this trigger is primarily used in bottling our smaller 16oz products such as all our fragrances. The trigger is perfect for reduce cost to customers on smaller bottles that are used and empty before your trigger has given out. This cheaper costs, however, results in a product more susceptible to wear and tear for prolonged use beyond its lifespan.
This triggers is our most versatile trigger and a standard for most of our customer. Rubber piston cups extend the life and durability of this trigger. Its three finger trigger lends support and comfortability to the user.
Chemical Resistant Triggers
This is one of most essential triggers due to the fact that it holds up the best against our Products’ tire shine. Its superior resistance and sturdy outer body makes it perfect when looking for a durable trigger. Products that are best used with this trigger include tire shines, Wheel Bright, Leather & Plastic Cleaner, Whitewall Cleaner, Bug Away, Lift Out, and Dry Foam.
These triggers allow for optimal comfortability with outstanding results. They have an adjustable nozzle-tip ranging from wide mist to sharp stream. They feature a comfortable four finger trigger grip and comes equipped with a heavy-duty strainer. Products that are best used with this trigger include degreasers, Wheel Bright, Leather & Plastic Cleaner, Whitewall Cleaner, Bug Away, Lift Out, and Dry Foam.
Upside Down Triggers
This trigger allows maximum mobility for those hard to reach spots! It works at any angle and completely upside down. It has an adjustable nozzle-tip ranging from wide mist to sharp stream. It features a comfortable four finger trigger grip and comes equipped with a heavy-duty strainer. Products best used with this trigger include Extra Strength Glass Cleaner, Leather & Plastic Cleaner, Bug Away, Lift Out, and Dry Foam.
Acid Resistant Triggers
The proprietary design of this trigger extends its product life beyond any other with acidic solutions. Its greater output per stroke significantly reduces the number of pulls on the trigger reducing fatigue on your hands as well as the trigger itself. Its outer body protects the piston assembly from damage during use and storage. Products best used with this trigger include Aluminum Brightener, Wheel Bright, and other acidic solutions.
We offer all kinds of cosmetic packaging, such as Mini Spray Pen wholesales, please consult us if you have any questions.
April 28, 2021 in Uncategorized
The following breakdown on spray bottles can prove useful in trying to get your business going due to good user design and marketing.
Plastic Trigger Sprayer factorys are an essential to many households around the world. Most spray bottles consist of a container that holds the liquid, a straw that sucks up the liquid, and the dispensing unit that delivers the liquid in a spray. Spray bottles are popular in dispensing liquids like perfumes and fragrances, hair products such as conditioners and sprays, facial products like micellar water and toners, and more cosmetics products.
However, they are not only limited to the cosmetics industry.
Spray bottles are used to spray water and keep plants alive, to dispense cleaning products such as soap, furniture and glass cleaners, and more. Spray bottles are essential in our everyday lives. If you are thinking of starting a business that involves using spray bottles, it is important that you find out the best bottle to the right bottle so that you can market and sell your products more.
There are many kinds of bottles based on shapes, colors, materials, and sizes. The following breakdown on spray bottles can prove useful in trying to get your business going due to good user design and marketing. This can help you find the best design for your product.
What’s the Materials of Spray Bottles
Spray bottles are popular in many industries, ranging from hospitality to the cosmetics industry. The choice of material largely depends on some factors like the intended budget as some are more expensive than others, the intended use of the bottle, the target audience, and many more. There are some popular options in today’s market and we will explore three of them.
Glass Spray Bottles
Glass Spray Bottles Glass bottles have been around for ages, and have become more popular over time thanks to the environmental conservation concern. Bottles made of glass are commonly clear and transparent but can also be colored depending on the need of the manufacturer. They are also useful in terms of handling material as most of them are used to reduce tampering.
Glass bottles cannot be corroded, which makes them useful for storing chemicals or cleaning agents that need to be diluted to be used. If stored in the right places, some of the contents that may continue chlorides will not be broken down by exposure to the sun.
Glass can be revamped
Glass often comes in many shapes, forms, and colors. It offers the option to be stained, engraved, colored, and shaped to any shape imaginable. We have seen perfume spray bottles shaped like hearts, teardrops, and other unique shapes. This makes them a good choice if you want to explore your artistic side. You might have to contact your spray bottle manufacturer or spray bottle manufacturer if you cannot do the changes yourself.
They are reusable
Glass spray bottles are reusable in many cases. As some are mostly used in perfumes or essential oil storage, it is easy to find small businesses that also accept the bottles back for refills and recycling. Even at home, it is easy to clean a glass bottle at home and use it again. Environmentally speaking, they are some of the best choices for spray bottles, especially if you are going for a level of class and elegance.
If clear they can show contents
Unless opaque or darkly tainted glass is used, it is easy to tell the exact contents of a spray bottle based on the colors of the liquid. This makes it very easy to tell the contents of a bottle, which makes it easy to tell if they are still in a usable state or not. Some stained glass also show the amount of liquid left in the bottle for those who like to refill or buy another before it empties.
They retain temperatures
In order to retain some of the recommended temperatures to retain the quality and usefulness of some of the contents of spray bottles such as cleaning agents or cosmetics products that need to retain their quality for better functionality. Glass bottles are not easily affected by fluctuating temperature changes in the environment of the room.
They are a standard for class
Glass bottles are mainly used in high-end products such as fragrances and perfumes. Other materials are usually considered crass unless the theme requires them, in which case the thematic material will be used.
Metal Spray Bottles
There are many kinds of metal bottles in the world. Long ago, they were made of pure tin, but as time evolved, aluminum bottles have become more popular. Aluminum bottles are mostly used in the cosmetics industry especially for things like soap and gels which can be placed in bathrooms and other humid areas.
We offer all kinds of cosmetic packaging, such as Small Drinking Water Pump, please consult us if you have any questions.
April 14, 2021 in Uncategorized
Selecting the best water pump solution for your needs is vital to ensure you have the right size pump for the job at hand. You need to understand a few factors when considering water pumps such as:
Clean Water vs Grey Water vs Dirty Water
The Application of the Water Pump
The Size of the Dwelling using the Water Pump
The Volume of Water Required
The Type of Water Pump
1. The Water type passing through the Water Pump
To select the best Electric Drinking Water Pump wholesales for your needs, you must identify the type of water you will be dealing with. The 3 key types are outlined below:
Clean Water is Drinking water, also known as potable water, is water that is safe to drink or to use for food preparation. Often sourced from mains water supply to homes. Meets AS4020 standards.
Greywater is typically water from rain collected off roofs as well as re-usable wastewater from washing machines, showers and other sources. Greywater replaces the need to use mains water for watering gardens or lawns and can potentially save thousands of litres of drinking water.
Dirty Water is typically water that contains small particles. Used for watering gardens or lawns which can potentially save thousands of litres of drinking water. Includes rain or greywater.
2. The Application of the Water Pump
Water Transfer pumps are built for use in multiple applications for water supply and the transfer of water. Applications include
3. The Size of the Dwelling using the Water Pump
What size household, or other dwelling, is using the water pump? A single storey dwelling will have different needs to a double storey dwelling.
Smaller homes will likely have less taps in use and thus would have different needs to a larger home, which would have more taps in use and various combinations.
Also, if you need to account for outside watering or irrigation you need to include this when considering the dwelling size for your water pump.
4. The Volume of Water Required
To understand the volume of water required within the dwelling that is running the water pump, you will have to work out the number of taps or outlets, both inside and outside, that are likely to be in use simultaneously.
Keep in mind that different outlets will have different flow rates.
To work out your household water flow rate you can measure the time it takes to fill a bucket from each tap or outlet.
Flow Rates at Fixtures or Appliances
The flow rates to fixtures, appliances, taps, valves and cisterns shall be not less than the flow rates specified below.
The maximum flow rate from a shower, basin and kitchen sink or laundry trough outlet shall not exceed 9 L/min.
5. The Type of Water Pump
When it comes to water pumps, there are a few types including Jet Pump, Multi-Stage Pump, Submersible Pump and Circulation Pump.
Jet Pump Powered by an electric motor that contains and drives an impeller/centrifugal pump. The impeller moves water, through the Jet Pump and increases the pressure of the water, to assist in areas where high suction lift is required (e.g. double storey homes).
Multi-Stage Jet Pump A centrifugal pump containing two or more impellers is called a multi-stage centrifugal pump. The impellers may be mounted on the same shaft or on different shafts. For higher pressures at the outlet, impellers can be connected in series. For higher flow output, impellers can be connected in parallel. Multi-stage pumps are quieter and ideal for applications where low noise levels are required.
Submersible Pump A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body where the whole assembly is submerged in a water tank or pit. The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation difference between the pump and the fluid surface. Submersible pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles pumps are more efficient than jet pumps.
Circulation Pump A circulation pump is a specific type of pump used to circulate hot water in a closed circuit within a house or apartment. They are very efficient because they only need to distribute liquid within a closed circuit to overcome the friction of a fixed internal piping system.
We offer all kinds of pump, such as Lotion Pump Clip Lock, please consult us if you have any questions.
March 17, 2021 in Uncategorized
lotion pump dispenser are usually used in a wide range of beauty products, hygiene products, and cleaning agents like hand sanitizers. Because they are more convenient and easy to use, they have largely replaced traditional bottle caps.
Dispenser pumps are small plastic fittings that are usually used to dispense viscous liquids from containers. You simply press down on the pump and liquid comes out.
There are different types of dispenser pumps that are widely used as part of the packaging of different personal care and beauty products.
The three most common types of dispenser pumps are:
Screw / Lock-down pump dispensers
Switch pump dispensers
Although dispenser pumps operate similarly, there are slight modifications that affect how each dispenser works. In this article, we are going to talk about the differences between the three common types of pump dispensers.
Firstly, let’s take a look at the clip-lock pump dispenser. The clip-lock dispenser has a detachable plastic clip on the neck of the pump. The clip prevents any unintended dispensing of the content of the plastic bottles.
One advantage of this is that it makes it more difficult for children to accidentally spill the liquid on themselves once you attach the clip. For travelers, it is a good way to prevent lotions, personal care products, or cleaning agents in your bags or luggage from spilling onto your clothes.
Screw Pump / Lock-down Pump
The second most common type of dispenser pump is the screw pump. It is also called the lock-down pump, or the Switch Pump. The screw pump has a screw just under the head that you turn left or right to open or close the pump.
To use the screw pump, you must first unlock the spout by twisting it counterclockwise. With the dispenser unlocked, you can then apply pressure on the nozzle to dispense liquid. To lock the dispenser, you simply push the head down, then you twist it clockwise until you feel a bit of resistance as the screw engages.
You often see this type of pump heads on hair shampoos. Sometimes the dispenser caps are embossed with arrow signs that telling you which direction you should screw to lock or unlock the dispenser.
Switch Pump / Lock-up Pump
The switch pump is a popular dispenser. It is very easy and convenient to use. To dispense the liquid in the bottle, you simply press down on the nozzle, which snaps back to its original position. It is very popular because it is very easy to use and usually comes with a stylish finish.
As the dual name implies, the switch pump is also called the lock-up pump because it can be locked without being pushed down unlike the Screw pump. To lock the switch pump, you simply twist the nozzle left or right – depending on what the embossed sign says. Because of this, the caps of switch pumps usually have an ‘OPEN’ and a ‘STOP’ sign embossed on them.
Advantages of Using Pump Dispensers
Pump dispensers are widely used as part of the packaging for products like shampoos, liquid soaps, body lotions, and hand sanitizers. Some of the advantages of using Pump dispensers in your packaging is:
They are child friendly. The clip-lock dispenser is a valuable child-safety feature.
They are perfect for traveling because the contents are protected from spillages.
Some pump dispensers like the lockdown pump can dispense in larger doses if necessary.
They have an elegant and attractive design.
They are very convenient and easy to use.
To wrap it all up,
Clip-lock pumps come with a detachable clip to lock them in and prevent unintended dispensing by making it impossible for fluid to come out.
The screw pumps have an extra casing or enclosure that holds the screw part in place, and lastly
The switch pump can be opened or closed by simply twisting the head nozzle to the ‘OPEN’ or ‘STOP’ positions.
We offer all kinds of pump, such as Smart Drinking Water Pump, please consult us if you have any questions.
March 3, 2021 in Uncategorized
In rural Niger, community pumps are being installed in many villages in response to a widespread water crisis. Sixty-four percent of Niger’s rural population lacks access to clean water. About nine in ten citizens lack a proper way to dispose of their own waste.
These water woes promote disease, stagnate education and economic growth, and result in the majority of rural Niger’s infant and child deaths.
Niger is a drought-plagued land on the borders of the Sahara Desert. There is little rainfall, so groundwater must supply most people’s daily needs. Yet this traditional water source presents many problems.
Hand-dug wells lack concrete liners and are subject to contamination by seepage of waste and other contaminants. Traditional wells also have no Electric Drinking Water Pumps, so women must haul water up by hand in a demanding and time-consuming chore.
Existing wells are widely scattered—so that women and children may spend hours and travel many kilometers a day just to provide water for their homes.
A proliferation of modern drilled wells and pump systems can alleviate many of these problems, but most communities lack the resources to fund drilled wells or to purchase and maintain pumps.
In recent years, international organizations like UNICEF and the World Bank have been able to help.
UNICEF has funded the construction and repair of many boreholes and wells to provide clean water to more than a quarter million people.
The World Bank also has a program in place to fund local drillers and pump manufacturers that will be able to install some 100 wells and pumps per year—providing water to an additional 25,000 people annually.
The establishment of more modern wells is easing the health crisis caused by lack of clean potable water. It is also changing communities for the better.
Localized pumps relieve women and children of the water-carrying burden that consumes so much of their time and energy. With water accessible close to home, women and children have time to pursue their educations or other economic opportunities. Many community source pumps are intentionally located near schools, providing an added incentive for children to attend classes near the source of their family’s water.
We offer all kinds of pump, such as Smart Drinking Water Pump, please consult us if you have any questions.
February 24, 2021 in Uncategorized
Are you considering to buy a soap dispenser but you don’t know what factor to consider? It’s good to conduct enough research before you opt to buy a Lotion Dispenser Pump. Different soap dispensers are meant for different purposes.
A hand soap dispenser you use in your home might not be that effective when you use it in a business setting.
Clean customers are happy customers – read up on what to look for when shopping for a hand soap dispenser for your business.
How many employees do you have? Rather how many people will the soap dispenser serve?
You cannot have the same size soap dispenser as a business with an average of 100 customer inflow, while your business receives a thousand clients in a day. Get a soap dispenser that can hold enough soap to serve the whole day. Depending on your number of clients, get either a small dispenser with a capacity of 800 ml or a big dispenser with 1250 ml
You would not want to refill your soap dispenser every twenty minutes.
2. Weigh Between The Automatic And Manual Dispenser
Automatic and manual dispensers comprise the two main categories of soap dispensers. The third type of soap dispenser is the pump dispenser.
For manual dispensers, you can choose to have either the push button or the pedal one.
As the name suggests, automatic dispenser does not need manual effort to trigger the release of the liquid soap. It is rather fixed with sensors that recognize certain motions and automatically dispense the liquid soap.
Pump dispensers are the most commonly used. They apply classic pump technology. Consider the nature of your business environment and choose from the three options.
3. The Material Making The Dispenser
The material making your dispenser will determine the durability of the equipment.
Apart from the commonly used plastic soap dispensers, there are quite many varieties you can choose from. They include steel, ceramic, and glass materials.
Before you choose a soap dispenser, evaluate the risks involved in your business. For example, if you are to locate the dispenser near the kitchen, then you would consider using ceramic and steel soap dispenser.
This is to avoid constant contraction and expansion of the plastic. This will ultimately lead to the development of cracks in the dispenser which might need you to replace the dispensers regularly.
Another factor to consider in choosing the material of the dispenser is the décor of the room it is located. If you are operating a restaurant business, for perfection, make sure the soap dispenser matches with the rest of the restroom supplies.
4. Liquid vs. Foam Soap Dispensers
A dispenser can be meant either for dispensation of liquid or foam soap. On a close evaluation of your business, which one would work best? There is actually no significant difference in the results.
The difference between liquid soap dispensers and foam soap dispensers is that foam dispensers are fitted with two pumps that release air and liquid simultaneously, hence dispensing foam. Since foam dispensers release pre-lathered soap, your customers and employees should need less water when rinsing.
Additionally, you will make fewer refills with the foam compared to the liquid soap dispensers.
Where do you want to place the dispenser? There are two possible places you can locate your dispenser. You can either mount them on the walls or the wall shelves.
You can decide to free your counter space for storage of other items. Or, you can opt for the manually operated soap dispenser which is usually manual. Though, this does not mean that if you have a manual dispenser, you will only be limited to placing it on the counter.
You can fix it on the wall using rings or brackets or even nail them. Before you decide on which one to get for your business, consider if you don’t mind having drills on your wall.
Having the wall-mounted dispensers will mean drills on your walls.
6. Price, Location, and Impression.
If you are concerned with the image of your business, then I will advise you to go for sophisticated automatic soap dispensers. Technology has been stepped up the automatic soap dispensers in 2019. This means that you will have to dig dipper into your pockets to acquire them.
If you are after creating a good impression for your customers, locate the expensive soap dispenser in the distinguished visitor’s washroom, and locate budget soap dispensers in the junior employee’s washrooms.
Regardless of your impression concerns, you will have to spend more if your business attracts a high inflow of customers/clients for the automatic dispensers.
Quality is important. If you are after quality, then you will have to spend more. If quality is none of your concern, then you can opt for an economical dispenser. Even with a simple hand soap dispenser, you will be good to go.
Another factor that influences the price is the brand. You will have to spend more to have a soap dispenser from an established brand compared to an upcoming.
7. Compare And Weigh Your Options.
Now that you know the factors to consider when buying a soap dispenser for your business, sit down, and check what is important and what is not.
Which among the shortlisted soap dispensers will be eco-friendly. If your business is in an area with a scarcity of water, then go for a dispenser that uses less water.
Also, if you would like to save on electricity costs, go for manual dispensers. This is because automatic soap dispenser relies on electric power for it to release the liquid soap.
Choose a dispenser that will make sure maximum hygiene. After all, is hygiene not the main objective?
I hope you are now knowledgeable enough and ready to get your business that perfect soap dispenser. We have so far cited seven factors to consider before you make your order. As a recap of the discussion, before buying a soap dispenser consider:
Weigh between the automatic and manual dispenser
The material making the dispenser
Liquid vs. form soap dispensers
Price, location, and impression.
If you follow this guideline, you are likely to get the perfect soap dispenser that fits your type of business.
Visit our website for more information on other appliances you can use to improve your business environment.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump, please consult us if you have any questions.
January 20, 2021 in Uncategorized
Here we bring you two kinds of cylinder Foaming Trigger Sprayer, in addition to the different sizes, do you find any other differences? From the style, they look very similar, while the structure and manufacturing process is different.
The concentrate glass jar container, also called as pressed glass jars, if we observe carefully we will find the inner wall of the jar is straight up and down, there is no curved part on the inner neck part, but you can find there is a stage inside the mouth of press-and-blow molding glass jar.
Different manufacturing process
Pressing glass container, is to install a mold and a punch on the glass forming machine, inject the liquid glass into the mold and press the liquid glass by using the punch to make the glass into the shape required by the mold.
Blown glass container, which is made by Press & Blow Process. It can be blown into a glass container with a jar/bottle diameter larger than the mouth diameter.
In simple terms, the glass cosmetic jars with stage inside are blown glass jars, and those jars with straight inner wall (from the mouth till the base) are concentrate glass jar containers (or pressed glass jars).
The shape of this two styles of glass cosmetic container can be round, square or other customized shapes. Usually the concentrate glass jars are used as primary glass packaging solutions for wax, cannabis concentrates, lip balm, eye cream, eye liner gel etc. And the blown glass container are ideal packaging for cream, moisturizer, gel mask, body scrub etc.
We also have lots of products for cosmetic packaging,such as Mini Spray Pen, Please let us know if you need any.