There are many types of tensioners, which can be divided into 1″ ratchet buckle , 2″ ratchet buckle, 3″ ratchet buckle, etc. according to the size.
We all know that the tensioner is used when the goods are transported and moved, which can protect the goods from damage to a large extent. When we use the tensioner, we should distinguish between the hook type and the non-hook type. Hook type: The first step: the two hooks are hooked on the base respectively, and the webbing needs to be fixed across the country. Step 2: Open the tensioner hardware, pass the webbing through the middle, and then pass back through the middle rotating shaft. The third part: pre-tighten the webbing. Part 4: Swing the handle back and forth to tighten the webbing, and the fixation is completed. Step 5: The following steps are the method of loosening the tensioner, pinch the fuse of the handle, open the tensioner hardware to the maximum, and the rotating shaft will automatically loosen. Step 6: Pull out the webbing and loosen the tensioner to complete. However, the hookless type has one more step. Use the tensioner webbing to wrap the base and the product to be fixed in a circle. The following steps are the same as the hook type.
The above is how to use tensioners such as a 2″ ratchet buckle .